Ford Bronco 2-Door 4Wd [Bilstein Factory Shocks
Fabtech's high quality 2-door Bronco lift kit offers increased front suspension travel for enhanced offroad capabilities with clearance to run 35" tall tires. The stance of the vehicle with this kit will become more level front to rear for an aggressive look.
The factory Bronco upper control arms are replaced with Fabtech's Uniball Upper Control Arms that provide additional wheel travel with an extra degree of caster compared to stock arms. The increased caster helps to balance steering effort with oversized tires.
The Fabtech upper control arms are constructed of the finest material with .120" wall 1.25" OD 4130 Chromoly steel tubing. High quality 1" FK Stainless PTFE lined Uniball bearings are utilized in place of the small factory ball joints and allow for increased travel without bind. These super stout Bronco upper control arms are designed for longevity in rugged offroad conditions while providing a more positive on road feel.
The Fabtech upper control arms have been designed to work in conjunction with the Dirt Logic 2.5 Coilover shocks to provide additional front wheel travel. The Dirt Logic 2.5 shocks features a stainless steel body for maximum corrosion resistance. These shocks have been extensively ride tuned over thousands of miles in various on and offroad terrain to establish the finest overall ride quality. They will provide a superior ride compared to the factory coilover shocks.
The rear suspension receives Adjustable Lower Link Arms with Fabtech's lifetime 5 Ton joints®. The lower links are .313 thick wall tubing that are guaranteed never to bend giving you the confidence to crawl over large rocks and obstacles with no issue.
The rear Dirt Logic 2.5 Coilovers feature coil springs designed specifically for the 2-door model. The factory 2-door Bronco uses the same rear shocks as the 4-door model. Using this higher spring rate on the lighter 2-door Bronco results in a harsher ride. To obtain the finest ride quality without losing load carrying capacity, Fabtech designed a 2-door specific spring.
Lift Kit Features:
Arms eliminate upper ball joint w/ super strong 1" ID Stainless American Uniball
Chromoly tubing reduces flex found in stock arms for more positive road feel
17-4 Stainless Steel Heat treated Uniball pin fits into factory ball joint taper without modification to the spindle
Adjustable lower rear link arms for increased strength & articulation
Front & Rear Dirt Logic 2.5 Coilover Shocks
Stainless Steel Body
7/8" NitroSteel Piston Rod
Rear 2-door specific coil springs
Tuned for an excellent highway ride with good offroad capability
Great system for the daily driver that requires increased offroad performance
****Tires & Wheels
Use 35/12.50R17 tires w/ 17x9 wheels w/ 4 1/2" BS w/ minor trimming
Use 35/12.50R18 tires w/ 18x;9 wheels w/ 4 1/2" BS w/ minor trimming
Use 35/12.50R20 tires w/ 20x9 wheels w/ 4 1/2" BS w/ minor trimming
Included Shocks
Front Dirt Logic 2.5 Resi Coilover
From our desert racing experience the Dirt Logic 2.5 has been developed for exceptional performance in a variety of Coilover applications. The Dirt Logic 2.5 will provide incredible dampening capacity for aggressive offroad driving.
- 2.5" OD Stainless Steel Body
- 2.25" OD Billet Aluminum Piston
- 7/8" NitroSteel® Black Piston Rod
- Cold Wound Coil Springs
- Adjustable Coilover Construction
- 5/8" Spherical Ball Mounting Ends
- 2.50" OD Aluminum Reservoir w/-8 Stainless Steel O-ring Hose
If you're interested in purchasing the parts of this full kit, you can find it here:
- FTS22336 : UCA Component Box
- FTS22338 : Rear Lower Component Box
- FTS22340 : Front Dirt Logic 2.5 Resi Coilovers
- FTS22341 : Rear Dirt Logic 2.5 Resi Coilovers
Featured Blog Post: Visit our blog to get the Do’s and Don’ts of Ford Bronco lift kits!
