If you are a new Ford Bronco owner and are planning to outfit your new Bronco with overland or rock crawling adventure features, ReadyLIFT has a new lift kit engineered just for you.
Our new 69-21210 Ford Bronco High Payload" 2" SST lift kit has been designed to meet the needs of Bronco adventurists who typically add lots of heavy aftermarket products such as rooftop tents, tools, refrigerators, etc.
This new lift kit takes our standard Ford Bronco SST lift kit and adds additional rear lift height to compensate for additional cargo weight.
The new 69-21210 2" SST lift kit is engineered for use on new Ford Bronco vehicles that do not have the Sasquatch package which includes Badlands, Wildtrak, and First Edition, models.
This kit is intended for Broncos operating regularly with payload - cargo management systems, rooftop equipment, steel bumpers, Overlanding gear, oversized spare tires, etc.
The kit provides approximately 2.5" of rear lift when the vehicle is lightly loaded.
The all-new 69-21210 SST lift kit provides 2" of lift using our popular CNC-machined aircraft-grade 6061-T6 billet Aluminum front and rear top mount spacers that are developed to help maintain the factory ride and handling.
These new premium-grade spacers are designed to provide maximum lift height without creating ball joint or tie rod bind commonly found with inferior kits on the market.
Our engineering team has developed the appropriate geometry to allow the suspension to work flawlessly throughout the suspension cycle and range of travel.
69-21210 is completely bolt-on and requires no modifications or cutting to install, all while providing a much improved overall aggressive stance with an additional rake included to better accept heavier cargo weight.
Two inches of front lift allows the new Ford Bronco owner to take advantage of the increased ground and tire clearance to run much larger wheels and tires.
Our testing reveals that a 305/70R17 on a 17" wheel with +18 offset is the maximum size tire to run with no modifications or trimming required. 35x12.50 tire can be used with minor trimming and/or front crash bar removal.
Tire Fitment:
- 305/70R on 17x8.5 +18 Offset
- Max with Trimming - Tire: 35" x 12.5" Wheel: 9" wide 0 offset
- Tire Size: ReadyLIFT wheel and tire fitment recommendations are typically based on Wheel Pros wheels and Nitto tires. Due to product differences among tire manufacturers, tire specifications and dimensions including, but limited to, overall diameter, rolling diameter, tread width, aspect ratio, lug pattern, sidewall construction, and inflation pressure, will vary meaningfully by tire and wheel manufacturer. Every tire and wheel combination should be test fit before installation. Consult your local installer to learn more about the right tire fitment for your application.
- Ride Quality: When lifting a vehicle and installing aftermarket wheels and tires, a tire manufacturer's construction, and material quality can alter vehicle ride quality. When increasing a vehicle wheel and tire size, most larger aftermarket truck and SUV tires are 10-ply or more E tires compared to typical OEM 6-ply C tires. This more rigid sidewall construction increases the perception of suspension stiffness often described as ride harshness. The ride, handling, traction, noise, fuel economy, and wear differences between All-Season, All-Terrain, Mud-Terrain, or Trail-Terrain type tires can be significant. Please take into account that tire and wheel choice will generally have a meaningful impact on the ride and handling experience.
Kit Components:
- 2 front strut spacers
- 2 rear strut spacers
- Hardware Pack
Install Instructions:
- SAEJ2492 Warning: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle it differently than that factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or roll-over during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications and combinations of modifications are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
- Please read Instructions thoroughly and completely before beginning installation.
- Installation by a certified mechanic is recommended.
- ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation.
- Estimated Installation Time: 4.5 Hours +/- 0.5 hour excluding alignment and wheel/tire assembly
Additional Information:
- All-new High Payload" design exclusively for non-Sasquatch package equipped Ford Bronco vehicles.
- Allows for up to 305/70R17 tire on a +18 wheel with no trimming - 35x12.50 with trimming modifications.
- Kit includes all-new CNC-machined aircraft-grade 6061-T6 billet Aluminum front and rear top mount spacers.
- No modifications or cutting is required to install.
***Note: Does NOT fit Sasquatch Package equipped vehicles, Badlands, Wildtraks,and First Edition.
Featured Blog Post: Visit our blog to get the Do’s and Don’ts of Ford Bronco lift kits!
