The Duo Drawer is the best of both worlds. It's a 6" drawer as well as a table surface that slide out with the drawer tray. The table surface is built from 3/4" alternating grain bamboo.
Built from 5052 aluminum, these drawers are designed to last a lifetime. The 6th Gen Bronco features a large amount of room in the cargo area (as compared to other SUV's). Ford has done a great job of giving us access to all of the storage room possible. Our Bronco MASS drawers take advantage of all of this space. This particular drawer has an interior height of 6".
Each drawer ships with two dividers. The dividers can be slid into slots evenly spaced throughout the drawer. They can also be more permanently bolted into place with the provided zinc-coated hardware, including nylon lock nuts.
The drawers are "modules". They are built to stack on top of each other, providing for a large number of configuration options.
The drawers secure with what we call "HD MASS Connectors". You can think of these as installed nuts. Once you install them into your base (platform, top of bottom drawer, etc.) they can stay installed, making the assembly and disassembly of your module stack very easy. The HD Connectors also mean that you do not have to get below the platform to hold a nut. It also means that there is nothing on your platform to ever wear out.
These drawer modules do not require our MASS Platform. They can be used in a universal system. If you are using these in a universal (ie. "custom") system, you will not need the HD MASS Connectors. If you are attaching these to our Bronco MASS Platform, you will need the HD MASS Connectors.
Interior Dimensions:
- Length: 25.4" (645mm)
- Width: 18.4" (467mm)
- Height: 6.3" (161mm)
Exterior Dimensions:
- Length: 27.6" (701mm) - tip of slide handle to rear face of drawer
- Width: 20.3" (517mm)
- Height: 8.4" (213mm)
Table Surface:
- Width: 18.25" (464mm)
- Depth: 18.2" (463mm)
Note:
- Raw/Unfinished: If ordering Raw/Unfinished products please note that these are “unfinished” products and may have slight imperfections on them such as burrs, scratches, sharp edges and dings. These are caused from things like being cut on the CNC, shipping process from our manufacturers or other things. They can be used as bare products at your own discretion but are meant to be painted/powder coated for a finished look and product.
- Powder coating is a manual process done by humans and may take some time. When you purchase powder coated products from AAL, we coat them for your order. Occasionally, that means delays with non-standard colors, resprays for less-than-perfect conditions, etc. We have a very high standard with powder coated products. We will work to get your parts coated in the best condition possible before they leave the building.
