Having a firm foundation to secure your cargo is essential to keeping your adventures organized. Our MASS Platform for the 6th Gen Ford Bronco is purpose built to provide the strongest and longest lasting base for a cargo system available. The subfloor is made up of 6 fabricated steel support members. Those bolt into factory holes and make for an amazingly strong attachment system for the 5052 aluminum floor panels. The aluminum keeps the weight low and serves as the mounting surface for your MASS storage modules.
All Access
We know it's super-important to not lose any space in our vehicles. The cubby compartment below the floor in the Bronco is space that is very useful. We have built access doors on both sides (i.e.. "columns") of the Bronco MASS system so you don't lose access to this area. We use a very specific latch that makes accessing this are not only easy, but very fulfilling. Just wait until you hear the sound made by removing and attaching the access door. We use a thin layer of foam on the access door mounting flanges. The foam prevents vibrations and ensures that the door stays under tension.
A Firm Foundation is Key
As with any stable structure, the foundation is the most important part. For our Bronco MASS Storage Platform, we use fabricated steel rails to establish the foundation of the platform.
Note:
- The Bronco MASS grid has 6 columns on pattern. The 7th row is not on pattern. So, you can run either our normal MASS modules that are built on the 6×4 pattern or you can run any modules listed as “Bronco MASS… (7×4)”. When you see the later listed, you will know that module is built for the Bronco’s full-width column. We do this to build the largest possible drawers and keep them as sturdy as possible. To recap, the 6×4 drawer would fit well, but it would not be full column wide. That may be exactly what you’re looking for – you may need more space on one column than the other. Our MASS System provides the flexibility to make your cargo system fit your needs..
- Raw/Unfinished: If ordering Raw/Unfinished products please note that these are "unfinished" products and may have slight imperfections on them such as burrs, scratches, sharp edges and dings. These are caused from things like being cut on the CNC, shipping process from our manufacturers or other things. They can be used as bare products at your own discretion but are meant to be painted/powder coated for a finished look and product.
- Powder coating may add 1-4 weeks to the processing time depending on color!
